Light Tower Generator is essential power equipment for nighttime construction, emergency response, and outdoor activities. Knowing the correct procedures ensures good performance and safety. The following is for your reference.
Pre-Operation Preparation of Light Tower Generator
Before activating your Light Tower Generator, conduct thorough visual inspections. Check fuel levels, hydraulic systems (if equipped), and LED/casing integrity. Verify all control panel switches are in "OFF" position. Ensure the unit stands on stable ground with 2-meter clearance from combustibles.
Powering Up Sequence
Start by engaging the master power switch, followed by the fuel valve. Allow 30-second system self-check when available. For diesel models, use glow plugs in cold climates before ignition. Gradually increase brightness via dimmer controls to prevent sudden load surges.
Runtime Monitoring of Light Tower Generator
During operation, periodically inspect the Light Tower Generator for abnormal vibrations or exhaust colors. Modern units feature automatic shutdown for low oil or overheating, but manual checks remain essential. Rotate mast sections evenly if equipped with directional lighting.
Shutdown Protocol
Reduce brightness to 50% before switching off lights to stabilize voltage. Turn off accessories sequentially, then cut main power. Always allow cooling time before refueling or transport. Store with clean fuel filters and charged batteries for next deployment.
By adhering to these protocols, your Light Tower Generator will deliver reliable illumination while extending service life.
More information about Light Tower Generator:http://www.hqstr.com/
