Proper storage is critical for maintaining the performance and longevity of an Integrated Generator. Whether preparing for seasonal inactivity or extended shutdown periods, following these comprehensive storage procedures will ensure your unit remains in optimal condition.
1. Fuel System Preparation
The Integrated Generator's fuel system requires special attention to prevent degradation:
Add fuel stabilizer to the tank and run the generator for 10 minutes to circulate treated fuel
For diesel units, consider using biocides to prevent microbial growth
Either completely fill the tank (to minimize condensation) or drain it entirely
Cap all fuel line openings with desiccant plugs to prevent moisture ingress
2. Engine Preservation
Protect internal components from corrosion during storage:
Change oil and filters prior to storage to remove acidic contaminants
Apply fogging oil through the spark plug holes for gasoline engines
Rotate the engine manually every 3 months to prevent bearing brinelling
Seal air intake and exhaust ports with breathable, waterproof covers
3. Battery Maintenance
Preserve the Integrated Generator's electrical system:
Disconnect and remove the battery, storing in a climate-controlled environment
Maintain charge at 12.6V using a smart maintainer (not a trickle charger)
Clean terminals with baking soda solution and apply anti-corrosion gel
Perform monthly voltage checks and recharge when below 12.4V
4. Environmental Protection
Proper siting and covering are essential:
Store in a dry, ventilated area with stable temperatures (ideally 10-25°C)
Elevate the unit on pallets to prevent moisture absorption from concrete floors
Use a breathable, waterproof cover with UV protection
Place moisture absorbers (silica gel packs) in control compartments
5. Control System Safeguards
Protect sensitive electronics during storage:
Remove and separately bag all removable control modules
Apply contact preservative to all electrical connectors
Cover display panels with anti-static protective film
Place rodent deterrents around the storage area
6. Reactivation Preparation
Ensure easy return to service:
Document storage date and maintenance performed
Create a reactivation checklist including fluid checks and system tests
Store all maintenance records with the unit
Keep essential spare parts (filters, gaskets) in the same storage environment
By implementing these storage protocols, your Integrated Generator will be protected from the damaging effects of inactivity. Regular monthly inspections during storage periods allow for early detection of potential issues. When properly stored, the unit can be quickly returned to service with minimal preparation, delivering reliable power exactly when needed.
More information about Huaquan Power：http://www.hqstr.com/
